evga precision x how to overclock with scanner

Now, the GPU often holds at 2010MHz using the same 1.038V applied previously at 1920MHz - essentially an undervolt. The test passed, and I applied the concluded GPU and memory clock frequency offsets (+130 and +200 respectively). Having the same curiosity as above, I allowed Precision X1's VF Curve Tuner to perform an OC scan. So, I was satisfied from the start when my 3090 topped at 1865MHz to 1920MHz 'out of the box'. IA voltage went from 1.455V to 1.506V.ĮVGA advertises an '1800MHz Boost Clock' on the RTX 3090 FTW3 Ultra (vs. Upon removing the offset, the frequency remained the same but voltages jumped to ~1.40V to ~1.41V with a max package temps lingering ~78✬ to ~80✬. I discovered this was probably because I forgot to reset/disable the core voltage offset in XTU. Throughout the first couple of weeks the system experienced a crash and executed an auto-reboot three times. After enabling and allowing the system to learn the CPU limits, all-cores clock frequency topped at 4.9GHz with core voltage sitting at ~1.35V to 1.38V and average CPU temp plateauing at ~70✬. When winter came around, ambient temp now is ~21✬, I decided to try Asus's AI Overclock. At 100% load, the CPU package temp settled at ~68✬ with core voltage ranging from ~1.28V to ~1.31V. By default, the i7-11700K has a single core Max Turbo Boost of 5.0GHz and an all-core Turbo of 4.6GHz. FYI: The ambient temp averages ~24✬.Īlso during the summer/fall heat, I undervolted my Intel rig's 11700K to keep temps lower. :) Indeed, I don't normally run the system that way. The CPU does hold ~4.8GHz all cores (for the most part) though. When enabling PBO (auto limits), the under load CPU almost immediately jumps to ~96✬ - obviously, the thermal wall. If the graphics card is also active, that value ramps up another ~10✬. I previously posted a brief AMD PBO test:ĭefault/stock OC/boost: my SFF rig with 5600X cooled by an NH-U9S maxes out in the low to mid 70s C. Corsair's iCue software as a secondary reference for monitoring sensors. So, I decided to experiment on the 'one-click' AI-based masters. However, in the past 10 years auto OC features have emerged.

As much of an enthusiast as I am, I have yet to believe manual overclocking is worthwhile.

Evga precision x how to overclock with scanner